Installing lamps correctly: A short guide

You have in the online lamp shop from BUYnBLUE Bought a lamp and want to attach the new piece of jewelry straight away and make it shine? However, to add to the anticipation when the lamp lights up for the first time after correct installation, we want to add a few important things. Use our little lamp installation guide to ensure your lighting is connected correctly and no accidents happen.

If you've ever been behind one Power plug or have looked at a power connection, you have probably noticed that there are a variety of different colored cables for electrical services installed behind it. The corresponding cable colors are not chosen at random and are installed in accordance with the standards of the European and International IEC (International Electrotechnical Commission). There can always be variations locally, which is why you should familiarize yourself with the color code for electrical wiring in your region before installing your new lamp.

Lamps for different areas of your home are installed in different locations and require different mountings. In this article we have put together some important information for connecting your lamps. 

 

Electrical wiring color codes

Electrical wire color codes vary by country. In the United States, for example, the National Electrical Code NEC is the standard. Canada has the Canadian Electric Code, while most European countries and many other countries around the world use IEC standards. Because these standards differ in important ways and only the ground wire is clearly identifiable in all three standards, you should always consult a guide for your country and region before attempting any electrical installation yourself or, ideally, consult a knowledgeable electrician. 

What applies to all do-it-yourselfers in Germany when working with electrical cables and when... Installation of ceiling lights, wall lights, outdoor lighting and other lamps, this important rule is:

As a safety precaution, the entire power supply must be turned off before work. There is a fuse box in most buildings and apartments. Here you can interrupt the power supply for the individual rooms and switch it on again after attaching the lamp. If you want to be on the safe side, you can flip the main switch or turn out the main fuse. This means there is no risk of electric shock or cable fire.

 

Which cables have which color?

A cable that carries electricity is made up of several wires. Each line has a different color. If you have one at home Ceiling lamp or one Chandelier If you want to connect, you should definitely know the meaning of the different cable colors. An incorrectly connected power connection poses dangers such as cable fires and electric shocks. If you carry out this work yourself, you will be held responsible for any damage. Today's home electrical system usually consists of three-wire sheathed cables.

 

Green-yellow cables:

• are so-called protective conductors/earthings,
• serve to protect against electric shocks,
• conduct voltages or dangerous electrical currents into the ground
• and are called PE cables (“Potected Earth”).

 

Brown-black cables:

• are referred to as external conductors or phase conductors or phase,
• This wire is the current conductor, which is live stands
• and the cables are called L-lines (“Line Conductor”).

 

Blue-grey cables:

• are called neutral conductor (N),
• carry the current from the consumer back to the voltage source
• and are also called neutral conductors.

 

Some power lines also consist of five wires with different colors and are not necessarily fused. So always check the cables thoroughly before disconnecting or connecting anything!

In old buildings, for example, a ceiling light is attached with a luster terminal, into which the brown and blue cables are inserted and hung from the ceiling using the terminal screws. The pipes here do not run a few centimeters below the ceiling as in new buildings. The best way to determine exactly where power lines are is to use a special locating device so that you can locate the lines do not drill or pierce.

 

Care must be taken when installing lamps in the bathroom

In the bathroom you can relax after a long and tiring day with a warm shower or a long bath. It offers you a calm and relaxing atmosphere modern ceiling lamps and high quality wall lights from ours Online lamp shop. Before you can enjoy the pleasant play of light and colors, the lamps must be professionally installed.

The bathroom is a wet area. High humidity and running water are a major source of danger if lamps in the bathroom are installed incorrectly. Water conducts electricity very well and accidents can quickly occur. When connecting new light sources, pay particular attention to the insulation of the cables and lines that carry electricity! Avoid installing the lights directly near water pipes and check the lamps for leaks. This way you can experience a wonderful and safe wellness experience. 

 

The lighting in the children's room should be chosen carefully

Children of all ages enjoy playing with friends or by themselves in their children's room. They live out their ideas and fantasies and are always learning new things. Chic ones provide the right light Deck lamps and Table lamps in a child-friendly design or to match the furnishings of the children's room.

If you want to install a lamp in the children's room, both the right light intensity as well as the optimal position and secure installation are crucial. Sockets should either have protective caps or their condition should be checked regularly so that the child does not suffer injuries. Wiring should definitely be well attached and safely laid behind a box so that the little ones don't get the idea of ​​playing with it.

Various lamps are advisable in the children's room so that the room is properly lit at all times. During the day, when the sun isn't shining, bright lamps with a large beam of light are perfect for extended play activities. In the evening, a small table lamp or bedside lamp creates the right atmosphere for falling asleep. There are special lamps for the children's room with beautiful motifs to suit your taste. This is how you make sure that your little treasure is happy feels completely comfortable in his little kingdom.

 

The optimal installation of living room lamps

If you have your lamps in Living room If you place it correctly and install it successfully, you will create a wonderful ambience to linger and enjoy. The living room is usually the largest room in an apartment or house. It offers plenty of space for various activities for the whole family and for visiting.

Different lamp variants are used in the living room. Above the dining area, dining table lights such as pendant lights at the right height are a suitable light source for long meals and everyday meals together. The seating area with a cozy or chic couch is often combined with a modern one Floor lamps illuminated to create a quiet atmosphere for conversations and cozy TV evenings. Reading corners in another corner or on a large windowsill are a popular option for relaxing moments. Appropriate combined lighting with a table lamp makes this corner an elegant and calm area.

When you connect the lamps in the living room, make sure that the voltage is correct and that each lamp receives the appropriate power supply. You can customize the design and brightness of the lights to suit your interior. 

 

Smart lighting systems

Today, many devices and lamps at home and in the office are controlled via a smart home system. A corresponding lighting system is then coupled to this. You can turn your lights on and off mobile and automatically and use sensors to control light intensity and timers.

A smart lighting system offers an ingenious way to reduce electricity costs and intelligently control and optimize energy consumption. You can usually connect any new lamp to your smart home and sit back in comfort while the artificial intelligence controls your lighting.

For correct installation, you can usually find the instructions in an app or in the operating instructions. The clever system detects errors immediately and alerts you to any malfunctions. You can regularly check whether the lamps are working correctly. If you want to change the settings, operate the lighting using a remote control or your smartphone. You can set the perfect light effects and light levels for every occasion and every season.

 

Conclusion

In general, new and modern lamps can now be easily connected and integrated into the existing lighting system without having to be a trained electrician. Quality lamps always have a circuit breaker and are additionally protected so that they do not cause cable fires and electrical accidents. Specialist knowledge is required if you work on live cables or want to re-lay old cables. It is always important to interrupt the existing circuit before you start installing new lamps.

If you are unsure, we recommend going to a specialist at any time. Professional installers know what to consider and how to handle power sources. Enjoy your elegant and timeless lamps from our range. The selection is huge and we offer different lamps for all rooms in your home in special designs. We would be happy to advise you on our various models and show you how to properly integrate them into your rooms.